11 DIY Cedar Hot Tub Plans For Soothing Winter Baths
Let’s make a super soothing bathing point for your backyard by getting inspiration from these easiest DIY cedar hot tub plans.
You can easily transform your outdoor space into a soothing oasis with the cheapest wood available following these exciting DIY cedar hot tub plans.
DIY Cedar Hot Tub
The following list is your golden ticket to a luxuriously warm, cedar-scented haven in your backyard. After extensive research and numerous hours finding the perfect projects, I have gathered a comprehensive list of cedar hot tub plans for you. Whether you are a skilled handyman or a beginner eager to enter the DIY world, I’ve covered all bases. This series will empower you to construct a hot tub that fits your relaxation needs and shows off your creative skills!
Different Types Of Hot Tub Plans I Gathered Here Are:
- Wooden Hot Tub: Make a relaxing backyard spot using wood. Enjoy a homemade hot tub and show off your do-it-yourself efforts!
- Cedar Hot Tub: Build a calming hot tub using cedar wood. Feel happy knowing you built this perfect place to relax!
- DIY Pallet Hot Tub: Use simple pallets to create a special place to unwind. Be smart and make the most of recycled wood!
- Wood-Fired Hot Tub: Learn to build a hot tub warmed by a wood fire. Change your backyard into a place for tradition, and take pride in your work!
- Western Red Cedar Hot Tub Construction: Use fancy Western Red Cedar wood to create a beautiful hot tub. Show off your DIY skills while making something useful and nice-looking!
How To Build The Ultimate DIY Wooden Hot Tub
For an exceptional home spa experience, consider building your own DIY Cedar Hot Tub using this DIY guide. It employs a self-waterproofing design where the wood swells when absorbing water, sealing any leaks. Moreover, it proposes various designs, from cylindrical to cube-shaped, allowing customization to fit your taste and environment.
Craft your tub, focusing on creating a sturdy base and appropriate seating. Use bead and cove joinery for cylindrical shapes. Waterproof the tub by letting the wood swell and tighten naturally or using a pool liner. Consider your heating method; it could be wood-fired or electric. Take note of the tub’s size for heating efficiency. Finally, assemble and enjoy your DIY wooden hot tub.
Materials:
- Cedar Wood
- Bead and Cove Router Bits
- 316 Vinyl-Coated Cable
- Stainless Steel Turn Buckle
- Two Clamp Sets
- DIY Wood Fired Hot Tub Heater
How To Build Wooden Hot Tub
Learn how to make a hot tub to enjoy the ultimate relaxation and meditation. Adding a touch of luxury, this wooden tub also features a built-in bench for a comfortable soak. The tub incorporates an easy-to-use floor drain and a detailed guide to installing a submersible snorkel stove for heating the water.
Begins with finding the right cedar boards and sawing them into staves to form the sides of your hot tub. The staves will come together in a round shape by creating bead and cove joinery. The base is constructed from cedar boards joined by tongue and grove joints, supported by cedar joists. After assembling the staves and floor, install a drain and add benches made from leftover staves. Fill the tub with water and install a wood stove, ensuring it doesn’t touch the water. Voila! Your wooden hot tub is ready.
Materials:
- Cedar Boards
- Router and Router Bits
- Crosscut Saw or Table Saw
- 316 Vinyl-Coated Aircraft Tension Cable
- Wood Glue
- Push Button Drain and Ball Valve
- Submersible Wood-Fired Stove
- Rubber Washers and Stainless Steel Bolts
- Extra Cedar Wood for Benches and Fence
How To Build A Cedar Hot Tub
Enhance your backyard with a DIY hot tub for a spa-like experience and add a modern touch. This hot tub uses durable materials, features a circular design that can comfortably accommodate up to five adults, and includes heating and water filtration systems.
Creating your cedar hot tub requires careful planning and execution. Begin by designing your tub’s measurements and gathering cedar for the staves and the base. Create joints trimming each stave to form a circular pattern and implement a watertight, cove-and-bead joint. Prepare a stable platform to support the tub and fill it with water. Efficiently control the water temperature by installing a wood-fired stove or liner. Appreciate your efforts while soaking in your self-made Cedar hot tub.
Materials:
- 2×6 STK select tight knot red cedar
- 1×6 TG cedar
- Complete Spa Pack (includes an electric heater, pump, and filtration system)
- Vinyl-coated galvanized Steel Wire Rope
- Brick Pavers
DIY Pallet Hot Tub
Get ready to transform your backyard into a relaxation station with this DIY project. The idea uses the IBC tanks and pallets, making it a cost-effective and easy option. The project also has a video tutorial for more assistance.
To craft a DIY cedar hot tub, start with the design of a 40 inches deep and 5 feet in diameter circular tub made from select knot red cedar. Each stave is trimmed at an angle, forming a circular pattern. Implement a watertight cove-and-bead (canoe) joint. Build on a sturdy platform capable of holding the hot tub’s weight. A spa pack controls water cleanliness and temperature for a comforting soak. Enjoy the rewarding process of constructing and using your hand-built cedar hot tub.
Materials:
- IBC Tanks
- Pallets
- Copper Pipe
- Propane Tank
- Plumbing Connectors
How To Build Hot Tub Steps A Step By Step Guide
Building your hot tub steps can elevate the aesthetics of your spa while ensuring a safe entry and exit point. You can tailor the size and style to match your spa and surroundings. Apart from providing convenience and safety, these steps can also be integrated with storage, making the most out of your hot tub space.
Select good-looking wood like Redwood, Cedar, or kiln-hardened Douglas fir to build hot tub steps. Cut stringers and sides from a 2×6 and treads from a 2×4. Build two boxes from these pieces, then stack and securely connect them. Attach two treads per step level, centering them and leaving a gap. Always measure twice before cutting. Finally, fasten your completed steps to the hot tub and deck, securing them properly for safety.
Materials:
- Wood
- 2×6 Boards
- 2×4 Boards
- Wood Screws
- Wood Glue
- Mounting Brackets and Screw
How To Build A DIY Hot Tub In Your Backyard
Leave the commercial hot tubs behind and embrace the satisfaction of building your own. This step-by-step guide describes all the processes of making, uses, and suggestions. But more than just a hot tub, this DIY project is a unique, rustic addition to your backyard aesthetic and a testament to practical, hands-on craft.
To build a DIY hot tub, select a location, plan for weight bearing, and frame your deck and foundation. Add deck boards, adjusting for irregularities. Choose to frame your tub or not, and place your tub and stove accordingly, marking your frame. Pay attention to details, like siding and stove heat. Install the stove to insulate your tub; the final step is to fill and fire up your hot tub.
Materials:
- Six concrete footings with 4×4 recesses in the center
- Two 4×4 pressure-treated posts
- Pea gravel
- 2×6 and 2×4 premium grade Douglas Fir framing timber
- 2×6 and 2×4 joist hangers
- Galvanized nails or joist screws
- Galvanized corner brackets
- Salvaged 3/4 cedar siding
- One gallon Thompson’s Timber Oil (clear)
- 4×8 sheet, 2″ rigid foam insulation
- 2×25 roll of reflective bubble wrap insulation
- Chofu Stove
- 2×6 galvanized stock tank
- Deck materials
How to Build A Wood Fired Hot Tub
This DIY Wood-Fired Hot Tub project transforms your outdoor space into a warm, inviting oasis. With its circular design, built-in stove, convenient steps, and comfortable bench for soaking, this wooden and metal outdoor hot tub is exactly what you need!
Create a wood-fired hot tub; pick a flat, sturdy location first. Set up a tub foundation using chime joists and arrange your tub bottom atop. Install a drain and fit the staves around the tub bottom. Use hoops to secure the staves together and ensure the tub shape. Install the stove inside the tub, following with the stove handle and pipe. Build an around-the-stove fence for safety. make the benches and steps, then fill the tub.
Materials:
- Wood and Stainless Steel Tub from Snorkel Hot Tubs
- Chime Joists
- Wood Strips
- Wood Shims
- Silicone & Sealant
- Rubber Gasket
- Fitting Adaptor
- Staves
- Blue Masking Tape
- Mallet
- Hoop pieces & Coupler Nut
- Wood Blocks
- Stove (from Snorkel)
- Mounting BracketsStove Door Handle
- Stove Pipe
- Rivet or Sheet Metal Screws
- Damper Handle/Pin
- Bench & Bench Supports
- Treads, Jacks, Lag Bolts, and supports for Steps
- Garden Hose
Hot Tub Pallet Tank Wood Fired Using Copper Coils
Creating your own Cedar Hot Tub can make the idealistic vision of an indulgent soak under starry skies a possibility. The DIY project optimizes the reuse of a pallet tank, and the heat source is a wood fire, which warms the water via copper coils. After a simple assembly, the hot tub can hold about 700 liters of water.
For creating a hot tub from a pallet tank, use a copper pipe (preferably 10 meters of 22mm diameter) and arrange it in coils. Cut the pipe into four sections of 2.5 meters and fill it with sand before bending it around a cylinder. Align these pipes in a stove’s chimney. Create tank connectors to enable water flow through the pipes, promoting heat convection. Insulate your tub for heat retention before filling it up and firing it up.
Materials:
- Pallet tank
- Tank connector pieces (8 brass compression fitting tank connectors were used in the article)
- Soft copper pipe (10 meters of 22mm diameter soft copper pipe was used in the article)
- Clean fine-grained sand for pipe bending
- Waterproof insulation material
- Tools such as metal drills, angle grinders, clamps, metal saws, wrenches
- Optional wood stove (using an open fire is also possible, but more heat is lost)
- Optional PTFE tape for an easy, waterproof connection
How To Build A Wooden Hot Tub
Add rustic appeal to your backyard with a DIY Cedar Hot Tub. The tub, crafted from a moisture-resistant, durable wood such as cedar, offers an intimate, relaxing oasis. Constructed by joining individual wooden elements into a single solid structure created to withstand water exposure, it also includes benches and a draining system.
Building a wooden hot tub requires specific woods, such as cedar or oak. First, construct tightly joined elements for the tub to ensure a solid structure. Cut a drain hole in the tub’s bottom, set it to a flat surface, and assemble the tub walls with sealed joints. Tighten the construction with metal bands for stability. Insert benches, then treat surfaces with fine sandpaper and lacquer. Regular maintenance, like retightening metal hoops, is a must.
Materials:
- Hardwood (like larch, cedar, beech, oak, or pine)
- Bottom for the hot tub
- Cross Joint
- Wooden Staves/Walls for hot tub (workpieces with glued edges)
- Moisture-resistant and frost-resistant Hermetic Sealant
- Metal Bands for tightening the hot tub structure
- Benches for the inside of the hot tub
- Fine Sandpaper
- Wood Preservative
- Lacquer
Woodworking Making A Cedar Hot Tub
This captivating tutorial guides you through creating a wood-burning hot tub. The ingenious creator demonstrates how to assemble tongue and groove walls, erect a sturdy 2×4 frame, and meticulously plumb the structure. Next, they ingeniously constructed a functional fireplace to heat the tub. Finally, it’s all sealed with a flex seal, ensuring it is completely waterproof for long-lasting relaxation.
Western Red Cedar Hot Tub Construction
This video tutorial presents a detailed construction process for a 6′ diameter x 4′ height western red cedar wood hot tub in San Francisco. The creator meticulously assembles the tub featuring a 14″ rim deck and 4 carefully placed jets, including a gas heater for optimal soaking comfort. Additionally, convenience is prioritized by incorporating a time clock and an air button.
